Jeep Repair: 98 jeep grand cherokee rear door panel removal, jeep grand cherokee, infinity speaker

Question
Kevin, how do I remove a 98 Grand Cherokee rear door panel to replace a blown Infinity speaker?

Thanks

Answer
REAR DOOR TRIM PANEL
REMOVAL
Remove screw attaching trim panel to inside release handle Rear Door Trim Panel
Remove screw at armrest.
Using trim remover (C-4829 or equivalent), detach trim panel perimeter push-in fasteners from door inner panel.
If equipped, disconnect the wiring connectors from power switch panel.
Lift trim panel over inside release handle and remove trim panel from door.
INSTALLATION
If equipped, connect the wiring connectors to power switch panel.
Position trim panel on door inner panel.
Press push-in fasteners inward around perimeter of door to attach it to inner panel.
Install armrest screw.
Install mirror bezel screw.
Install screw attaching trim panel to inside release handle