Motorcycle Repair: Harley Dyna Oil Change, harley dyna, oil plug

Question
QUESTION: What are the steps to do a complete oil change on a 2006 Harley Dyna???

ANSWER: Start the motor and let it warm up. remove the drain plug and drain the oil. While the oil is draining remove the oil filter. Install the new filter. make sure you put some oil on the gasket of the filter. Install the oil plug and fill the tank with the bike sitting on the kickstand and your good to go
Good luck and happy riding
Mike

---------- FOLLOW-UP ----------

QUESTION: What about the Tranny & Chaincase???

Thanks!!!

Answer
remove he drain plug and drain on the trans. Fill with trans fluid until it is on the full mark on the dipstick with the bike sitting upright.
On the primary, drain and remove the derby cover. Fill, with the bike sitting upright, until it is at the bottom edge of the derby cover.
Good luck and happy riding
Mike