Motorcycle Repair: front wheel, honda gl, fork legs

Question
I pulled off the front tire of my 1986 Honda GL 1200 Aspencade.After putting it back on along with the calipers i noticed that rigt caliper must be sticking so I rebuilt it .My question is is there a way to move the fork legs.In my repair book igt says that the caliper needs to be  a certain distance from the bracket . It says to move the fork leg to proper adjustment but does not tell me how to do this.Any Ideas thanks.There also is a little bit of shaking on the front but not all the time.Thanks again

Answer
Your triple tree (where the fork legs meet the neck) you will find clamping mechanisms that hold the legs in. put a bike jack lift under the bike and set to a comfortable height, loosen the brackets that hold the fork legs and move to the desired length, make certain they are equal and able to be grasped by the triple tree.