Motorcycle Repair: excessive vibration, excessive vibration, clutch plates

Question
this bike has been in storage for 2 years.it was not doing it before it was put up-------------------------
Followup To
Question -
hey mike,
i have a 1991 fxrp 1340 cc.it has a real bad vibration whenever i first take off or at real low speed.when i accelerate there is no vibration.while slowing down when vibration starts if i pull in clutch 95% of vibration stops.any help is aprecciated.

Answer -
Ias this somthing that just started, or has it gone on since youhad the bike?
Mike

Answer
Sounds like you have a clutch problem, since when you pull the clutch in (which takes the pressure off the clutch plates) you are not getting any vibration. I would pull the primary cover and remove the clutches and inpect them.
Good luck and happy riding
Mike