Nissan Repair: nissan 240sx electric window, nissan 240sx, wire cable

Question
a couple of days ago you cleared up my question about the door panel removal for 1990 240sx.  thanks.  now that the door panel is off, i can see that the wire cable that controls the window movement is loose.  i want to take the window track off the door frame to fix the cable.  the track is held on by four threaded studs which have a nut on each end, one connected to the door frame and the other connected to the window track.  is there a trick to removing the studs, because it doesn't seem like there is enough room to maneuver the track around the studs after i loosen the nuts.
thanks for your time,
randy lam

Answer
Randy,

This sucks but there is not a way.  You have to note where everything goes and take out all the nuts and the assembly falls into the door.  It is great to have someone help hold the glass up when you do this.  Now, with the tracks off the frame you can get them off the rollers and then the glass comes out.  If the motor is not damaged you can run it back adn forth to get it out one of the holes along with the mechanism.