Nissan Repair: Replacing Master switch, nissan sentra, master switch

Question
Dear Von Sudderth,
Thanks a lot for your last answer. As you told me the problem was the master switch of my power windows (Nissan Sentra 1995), I am trying to remove the driver´s door panel.
I unscrewed around 8 screws, and still couldn´t remove it. Moreover, there is no screw in the handle, so it seems that there is an unreachable clip or something in the inside. Do you know how can I remove that with no "expert" tools? (just screwdriver and a regular clamp).
Thanks a lot for this
Mauricio

Answer
Mauricio,

No need to remove the entire panel.  just take the screw out of the handle and using a cloth, pry up on the back edge of the master switch and it should lift out.  Then pull back and up and unplug it.  Replacement is the opposite of removal.  Other than a common and phillips screwdriver you need no special tools.