Small Engines (Lawn Mowers, etc.): briggs and stratto choremaster pressure washer, cotter pin, choremaster

Question
The tires have deflated and come off the wheels.  How do I remove the wheels and reinflate tires onto the bead?  Thank you in advance.

Answer
Hello Clint:

>>You will Most Likely need to Remove the Rim and Tire and take it to a Tire and Wheel Center and have them Use their Tire Tool so it can be Filled with Air to Reseat the Tire to the Rim.
>>There is a Tire Strap Tool that Circles the Tire and when the Strap is Tightened, it Causes the Tire to Expand at the Seat Area Towards the Rim enough so it can be Filled with Air and Reseated to the Rim.
>>If the Tire has a Hole in it they can Also Repair it.
>>"Sometimes" you can Use a Cheap Cargo Tie Down Strap and it will work like the Tire Strap Tool the Tire Shop Uses.
>>The Proper Air Pressure is Usually Listed Somewhere on the Tire.
>>Some Wheels have a Cotter Pin and Others Use a Bolt.
>>Send me the Model Numbers Off the Unit, Please. With these I can Locate the Proper Manual and Better Assist you.
>>Please, Do Not Hesitate, If you Hit a Snag, if I Missed Something or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

>>PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John