QuestionWe have a snapper rider mower that won't start. I got it tune up last year and it got a brand new spark plug, so that should not be a problem. It worked fine last year, but not this spring.
It cranks like crazy. I took off the spark wire and held it about 3/8ths inch from the spark plug. It arced well, zapping me through the thick leather glove I was wearing, so I know it is getting spark.
After cranking it a while, gas drips from the carburetor, so I know it is getting fuel.
Do you have a list of steps I should take to troubleshoot this? I'm not too handy with this kind of stuff, so I'd appreciate the help.
AnswerHello Gregg:
That had to Tingle. I Hate it when that Happens. Ive been Shocked Enough to Know. lol. Send me the Model and Type or Spec Numbers Off the Engine or the Mower Model Numbers, Please. With these I can Locate the Proper Manual and Better Assist you. The Engine Model Numbers May be Stamped Into the Blower Housing (metal engine cover) Above the Spark Plug. It May be that the Carburetor is Flooding the Engine Due to a Stuck Carburetor Float Needle Valve. Thanks.
Respectfully
John
If you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.
Good Luck
Respectfully
John
PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.
Respectfully
John
