Small Engines (Lawn Mowers, etc.): Generac portable generator removal, briggs straton, portable generator
QuestionI have Generac portable generator with a 10hp Briggs & Straton motor. I ran out of oil and the engine slightly seized. I am still able to turn the motor over but with great difficulty. I am trying to disassemble the motor and inspect it but am unable to remove the rotor from the crank. Is there a special tool for break the rotor off the crank? I need to remove it to get to the 4 bolts holding the cover to the engine. Thank you for any assistance you can provide
AnswerHello Mark:
By Rotor; are you Asking about the Flywheel or the Armeture of the Generator? You can View a Breakdown of the Pressure Washer at this Site Addy; http://www.pressureparts.com/Manuals.aspx and Select the Logo of the Manufacturer of your Pressure Washer. Then Select the Model of your Pressure Washer. Thanks.
Respectfully
John
PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.
Respectfully
John