Small Engines (Lawn Mowers, etc.): 18.5bstwin cyl murray mower, proper manuals, safety switches

Question
itran i shut it off wont start no fire took caseing off seems to me its like a coil pack took off cleaned put on still no fire please help

Answer
Hello Steve:

Send me the Model Numbers Off the Mower and the Model and Type Numbers Off the Engine, Please. With these I can Locate the Proper Manuals and Better Assist you. Did you Reset the Coil to .015in to .020in from the Flywheel? Check the Safety Switches and the Coil. For the Coil Check: Remove the Spark Plug. Wrap a Wire Around the Threads and Attach the Other End of the Wire to the Engine Block Turn the Engine and See if the Plug Fires. If No, then Disconnect the Shut Off Wire  at the Control Bracket First, Check for Fire at the Plug. If Still No Fire at the Plug; Then Disconnect the Shut Off Wire at the Coil (usually requires removal of the blower housing) and Check for Fire at the Plug. If No Fire at the Plug , then the Coil/Ign Module is Bad. The Coil/Ign Module to Flywheel Gap is .020in. On Some Model JD Engines, there is a Igniter that Goes Bad and Not the Coil. The Igniter is the Same as an Ignition Module. If the Plug Fires at Anytime During these 2 Checks, then a Safety Switch or Wire May be the Problem. Yes the Engine will Turn Even with a Bad Safety Switch. The Blade Safety is Usually the Cause of this. The Starter Turns and The Engine Doesn't Fire is an Indication of a Bad Coil/Ign Module or a Faulty Blade Safety Switch. The Clutch Safety Prevents the Starter from Engaging so the Mower Does Not Move when the Starter Turns the Engine. The Seat Safety is Designed to Stop the Engine if the Blades are Engaged or the Clutch Safety is Not Engaged when you Leave the Seat. To Check the Safety Switches: PLEASE REMEMBER THAT THE INSTRUCTIONS FOR CHECKING THE SAFETY SWITCHES IS JUST THAT!!! FOR CHECKING ONLY. I NEVER Suggest a Mower be Operated with a Safety Device or Switch Disconnected or Bypassed. Now. On Some Model Mowers you can Simply Unplug the Safety Switch from the Harness. On Other Models you have to Place a Jumper Wire Between the Harness Terminals (on the 4 Post Switch Jumper from Same Color Wire to Same Color Wire). Check the Clutch/Break and the Blade/PTO Safety Switches First. Check the Seat Safety Last. Usually the Seat Safety is Not in the System for Starting the Engine. Just to Ensure Someone is in the Seat when Engaging the Transaxle and/or Blades. Go to this Site Addy, http://www.smallenginepartswarehouse.com/parts.asp and Select Shop Online Parts Look Up. Then Select the Model Tab. Then Select the OEM (Murray) and Enter the Model Numbers. Then Double Click on your Model in the Results Area. Then Select the Section of the Mower you Wish to View. Hope this Helps. I am Here if You Require More Assistance. Let me Know What Happens, Please. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 9pm EST (US). My New Day Starts then. Thanks.

Respectfully

John