Small Engines (Lawn Mowers, etc.): Toro 832 snowblower, safety switches, face surface

Question
Hi Ron,
      I have a Toro snowblower thats seams in fairly good condition but i dont have fire. When i touch the top of the spark plug with my finger i get a small electric shock but i dont see a spark. So i think that the coil is working but not enough. Can you tel me what i need to do now.  

Answer
 Hello Richard:

 Check ALL the Safety Switches and Make sure they are Good. If they Are then, Clean the Magnets and the Face Surface of the Coil/Ignition Module. If the Problem Still Occurs then, Replace the Ignition Module/Coil. Gap the Coil/Ignition Module to .020in. Send me the Make Model Type and Code Numbers Off of the Engine, Please. With these I can Locate a Breakdown and Better Assist you. Hope this Helps. I am here if you Require more Assistance. Thanks.

 Good Luck

 Respectfully

 John