Questionhad it apart/when I replace throttle cable to metal plate (bottom
hole) throttle operates fine until I screw the assembly in the final
1/4 inch and then it seems too short and pulls the plate to the
left and won't release - have I assembled it wrong near the
throttle end? (near the squeeze trigger)
If I screw the assembly on prior to attaching the throttle cable It
is too short to get it in.
Is there a repair manual for this product?
Answer Hello Susan:
You can View a Breakdown/IPL for this Trimmer at this Addy http://www3.sears.com/ and Click the Lawn Equipment Box. Then Follow the Instructions to the View Parts List/View Diagram Page. Recheck the Route of the Cable. If the Cable Routing isn't Correct the Cable will be Short and Cause the Problem you are Having. This Trimmer is Manufactured by Poulan for Sears. You can Contact Poulan @ 870-845-1234 and Inquire about Purchasing a Repair Manual that Includes this Trimmer. Hope this Helps. I am here if you Require more Assistance. Thanks.
Good Luck
Respectfully
John
