Small Engines (Lawn Mowers, etc.): murray self propelled belt replacement, cotter pin, hello bill

Question
John,
I'm sorry i sent you the engine model number.The model number for the mower itself is 22716x92a.
Thanks again,
Bill P.
-------------------------

Followup To

Question -
John,
I have a 2000 Murray 22'cut self propelled lawnmower and trying to change out the drive belt.
After getting the wheels off and pulling a cotter pin out the wheel rod,I do not see how the rod is suppose to come out.There are no more nuts or bolts holding it in that I can see. There is a type of snap ring on each side.i'm wondering if this is it before pulling everything apart.
Thanks,
Bill P.

Answer -
 Hello Bill:

 Send me the Model Numbers Off of the Mower, Please. With the Model Numbers I can Look at the Diagram for this Mower and see the Motion Drive your Mower has. Thanks.

 Respectfully

 John

Answer
 Hello Bill:

 Great. Now we are getting Somewhere. Go to this Addy http://www.outdoordistributors.com/pdf/Murray/MURRAY-MODEL-22716X92A-WALK-BEHIND(2000)-PARTS-LIST.pdf and you can see the Breakdown of the Drive Assembly. Hope this Helps. Let me know what Happens, Please.

 Good Luck

 Respectfully

 John