Toyota Repair: 1994 camry cranks but wont start., fuse box, test light

Question
my Camry drove to work fine but after work would not start. Not firing. Belt is relatively new ,< 20,000 1 week befor it quit for a bad coil which i replaced. The tack is dead still while cranking the engine. I replaced the distribuitor per local mechanic. what next

Answer
Use a 12 volt test light or voltmeter and check to see if there is 12v battery voltage at the plus terminal of the coil with key on. Check all fuses in the fuse box under the hood and the inside at the left lower dash, make sure the EFI fuse is good.