Ford: 1974 ford pick-up 302 5.0, coil wire, plug wires

Question
I changed the coil and did not mark anything I put the number 1 cylinder @ top dead center and had the point facing 1 on the cap and plug wires are 15426378 truck ran fine before I touched it.  

Answer
Daniel, I don't understand your question.  Could you go into a little more detail about what is going on with the truck?  You said you changed the coil.  You should have pulled off the coil wire along with the harness for the primary circuit on the coil ( a clip on, that slides onto the top of the coil).  It sounds like you pulled all the wires or you pulled the distributor.  Tell me what all you did and why you did it.    Jason