4 Wheel Drive/SUVs: Lift kit problem, goodyear wrangler mt, relocation brackets

Question
I have a 2000 TJ Sport, I put a 2" Skyjacker block lift with new Nitro shocks.  At the same time I put on Goodyear Wrangler MT/R 31 in tires. While mounting the tires I found that the rear drivers side is very close to the coil spring mounting plate, Less than room for a finger, and the other has more than sufficient clearence. It appears something is now out of line. I know there was no collission damage it must have had something to do with the lift.  Any advise how to correct or should I ignore.      Thanks

Answer
Randy,

The first thing you need to do, is to contact the company you purchased the lift from.  This doesn't sound right.  It sounds like the track bars need relocation brackets.  They should have been included in the kit.  I have seen a small difference, but not as much as you seem to have.  If you had the lift installed by a shop, you should ask them about this also.  Let me know what they say.

  Carl