How to Replace a Fuel Pump in a Saturn VUE

The Saturn VUE has an electric fuel pump so you should check its fuses and relays and ensure you have fuel before performing the more difficult task of inspecting the fuel pump. If your vehicle still has difficulty getting fuel you may need to clean or replace the fuel pump. The Saturn VUE's variety of styles can affect the replacement fuel pump you choose.

Things You'll Need

  • Fuel pump kit
  • Socket wrench set
  • Tool SA9156E
  • Determine which fuel pump your Saturn VUE will need. This depends not only on the make and model, but also the engine size. Models made before 2008 may have a 2.2 L L61, 2.4 L BAS hybrid, 3.0 L L81 or 3.5 L L66 engine. Current models are offered with a 2.4 L LE5, 3.5 L LZ4 and 3.6 L LY7 engine.

  • Prepare your vehicle for fuel pump servicing. Relieve the fuel system pressure and disconnect the negative battery cable with a socket wrench. Disconnect the fuel tank.

  • Disconnect the fuel pump's electrical connector, fuel lines and hoses. Remove the retaining ring for the fuel pump with wrench SA9156E and disconnect the retaining clip by pulling it toward the float arm and lifting up. Lift the fuel pump out of the fuel tank and discard the old fuel tank seal.

  • Install the new fuel pump using the items included in the kit and be sure to replace the fuel tank seal. Install the lock ring on the fuel pump with tool SA9156E and connect the fuel lines and hoses. Plug in the wiring harness, connect the fuel tank and negative battery cable.

  • Start your vehicle to check for leaks.