The Viper 474V remote is among the various Viper remotes that can be programmed to control a variety of features on your car. These remotes are synced to a transmitter system that can be installed at the dealership or by an automotive store, and you can program the remotes yourself in just a few minutes from your driver's seat. This programming sequence will allow you to use your remotes right away.
Enter your car, leave your driver's door open and insert your key into the car's ignition. Turn the key to the "On" position.
Press the "Valet" button on your remote one time to program your alarm, twice to program your trunk release or three times to program your remote starter.
Wait for the car horn to chirp one, two or three times (depending on the last step), and press and hold the "Valet" button again.
Press and release the button on your remote that you would like to program while holding the "Valet" button.
Wait for the horn to chirp again to confirm successful programming and release the "Valet" button to end the process.
