Speedy Auto > Car Tech > 4x4 > Suspension Brakes

Teraflex Monster Forged Jeep JK Track Bar - Four Wheeler Magazine

Sean P. Holman Contributor

The quickest way to reduce shimmy and handling issues on your solid-axle rig is to use stouter parts. Take for example the adjustable Monster forged track bar for Wrangler JKs that is now available from Teraflex. This beast is 230 percent stronger than the factory, non-adjustable track bar and requires no bracketry changes. The Monster track bar is designed to completely cycle without causing any interference with existing components and will work with all suspension systems.

jeep Wrangler Jk Track Bar size Difference Photo 28620079

1. Here you can see the huge size difference between the Monster track bar (top) and the factory track bar (bottom).

We documented the install on a customer's Wrangler at Off Road Evolution in Fullerton, California. The entire install took about ten minutes and was almost as easy as one, two, three.

PhotosView Slideshow <strong>2.</strong> While we had this vehicle on the hoist, it is typically easier to swap track bars while the vehicle is on the ground at ride height, because the axle is centered and in the middle of the overall range of travel.

<strong>2.</strong> While we had this vehicle on the hoist, it is typically easier to swap track bars while the vehicle is on the ground at ride height, because the axle is centered and in the middle of the overall range of travel.

<strong>3.</strong> With two bolts removed, the stock track bar lifts right out.

<strong>4.</strong> The new Monster track bar installed as easily as the factory one was removed.

Teraflex Monster Forged Jeep JK Track Bar - Four Wheeler Magazine

You Might Also Like

DON'T MISS