One of the most asked questions we get here is, "How do I get more power from my four-cylinder S-10?" We decided to compile a list of power parts for the anemic four-bangers instead of telling you to swap in a small-block, which is our most common response. Most of these parts can be installed with some simple handtools and a little common sense. All of these parts will in one way or another give more performance by either creating more ponies or helping you get it to the ground faster. Maybe you shouldn't look at a four-cylinder as a bad thing but as a blessing in disguise. With gas prices sky-rocketing right now, these small motors just take less go-go juice to run, even when you install some of these power mods. The money you save at the pump could be used to buy new wheels or help get you closer to that body drop. Look, we know you might not be able to blow by your buddy on the track, but you can honk and wave as you pass him at the pump.
| chevrolet S10 Four Cylinder Performance Part airaid Poweraid Throttle Body Spacer
Airaid's PowerAid The 2.2L PowerAid 1-inch Throttle Body Spacer features PowerAid's unique, patented helix-bore design, which creates a spinning action of the incoming air charge as it passes through the throttle-body spacer. This air charge contributes to better atomization of the air/fuel mixture at the combustion chamber. The end result is more part-throttle torque, improved midrange power, and overall combustion efficiency for more mpg. The new PowerAid is an easy bolt-on installation and comes complete with all mounting hardware and easy-to-follow instructions. For more information, contact: Airaid, (800) 498-6951, www.airaid.com.
| chevrolet S10 Four Cylinder Performance Part accel Wires
ACCEL WiresFor improved performance, check out ACCEL's 300+ Thundersport Ferro-Spiral Wire Sets. Each high-gloss 8mm double-silicone wire is rated at more than 550 degrees F and features a precision-molded spark plug boot to fit the S-10. With a heavy-gauge spiral-wound alloy conductor, resistance is only 150 ohms per foot, providing maximum voltage potential at the spark plug. They are available in blue, red, or yellow wire colors. For more information, contact: ACCEL, (216) 688-8300, www.accel-ignition.com.
| chevrolet S10 Four Cylinder Performance Part accel Dis Coil
ACCEL DIS CoilThe DIS Coil features a "raised dome" construction and silicone magnetic steel core, along with optimized windings and resistance to produce higher energy spark for a more efficient fuel burn. It is compatible with OE computer-controlled ignition systems as well as aftermarket capacitive discharge systems. For more information, contact: ACCEL, (216) 688-8300, www.accel-ignition.com.
| chevrolet S10 Four Cylinder Performance Part centerforce Clutches
Centerforce ClutchesCenterforce has developed multiple clutch systems for the four-cylinder S-10. Depending on the vehicle model year, Centerforce offers three styles of clutches. Centerforce I is designed for a mild upgrade over stock. Centerforce II is intended for mildly upgraded trucks for towing and more spirited driving. Dual Friction clutch sets are geared for heavier towing, most off-road four-wheeling, and weekend racing with extreme power upgrades. For more information, contact: Centerforce, (928) 771-8422, www.centerforce.com.
| chevrolet S10 Four Cylinder Performance Part bosch Replacement Fuel Pump
Bosch Replacement Fuel PumpRobert Bosch Corporation has launched a comprehensive premium fuel pump program that uses advanced turbine technology to feed your four-cylinder. They conform to OE dimensions and appearance, ensuring safe, easy installations. For more information, contact: Bosch, (888) 715-3616, www.boschusa.com.
| chevrolet S10 Four Cylinder Performance Part dynomax Mufflers
DynoMax MufflersDynoMax offers a variety of exclusive muffler designs engineered to provide exceptional flow and appealing sound on a full range of popular performance applications. The brand's leading muffler designs are the DynoMax Ultra Flo muffler, featuring straight-through single-tube routing and continuous-roving fiberglass, and the DynoMax Super Turbo muffler, which contains patented flow directors to channel exhaust flow for enhanced power. For more information, contact: DynoMax Performance Exhaust, (734) 243-8000, www.dynomax.com.
| chevrolet S10 Four Cylinder Performance Part bm Sport Shifter
B&M's Sport ShifterB&M Racing & Performance's popular line of Precision Sport Shifters are now available for the Chevrolet S-10 pickup, providing street and off-road enthusiasts with pinpoint-accurate shifts. CAD-designed for ultra-precise shifts, B&M's S-10 Precision Sport Shifters substantially shorten the shifter throw by 36 percent. The shifters are bolt-in replacements that require only simple handtools for quick installation. For more information, contact: B&M, (818) 882-6422, www.bmracing.com.
| chevrolet S10 Four Cylinder Performance Part fidanza Flywheel
Fidanza FlywheelAluminum flywheels for the '94-'03 2.2L Chevrolet S-10 are made from machined 6061 T6 aluminum and feature a 1050 steel friction surface with CNC-machined fastener holes and chamfers. The flywheels can be paired with just about any clutch disc material available, from organic to Kevlar and even sintered iron. For more information, contact: Fidanza Engineering Corporation, (440) 259-5656, www.fidanza.com.
| chevrolet S10 Four Cylinder Performance Part hays Clutch
Hays Clutch The Hays line of clutch kits is specifically designed for severe usage; every unit is built to withstand extreme conditions and overuse. These kits are made in the USA and feature all-new parts - no used parts here. The clutches can significantly extend the service life when used in off-roading, towing, and performance trucks. For more information, contact: Hays, (216) 688-8300, www.haysclutches.com.
| chevrolet S10 Four Cylinder Performance Part professional Products Filter
Professional Products FilterThis Professional Products Hi-Tech Fuel Filter measures 3 inches long, 2 inches in diameter and flows as much as 160 gallons per hour, filters down to 10 microns, and handles as much as 60 psi. The lightweight-aluminum Hi-Tech Fuel Filter has a replaceable filter element and resists corrosion inside and out. The filter is available in either fully polished or with a blue-and-red anodized housing. For more information, contact: Professional Products, (323) 779-2020, www.pro fessional-products.com.
| chevrolet S10 Four Cylinder Performance Part kn Fipk
K&N FIPK With the addition of K&N's FIPK, horsepower, torque, and acceleration are improved with no decrease in fuel economy on the Chevy S-10. All K&N FIPK systems are 50-state-legal and are compatible with OE computer and emissions controls. Also, K&N's Million Mile Limited Warranty backs the system's filter. For more information, contact: K&N Engineering, (800) 213-4182, www.knfilters.com.
| chevrolet S10 Four Cylinder Performance Part pace Setter Headers
PaceSetter Headers PaceSetter Performance Products announces the availability of 50-state-legal headers for the '94-'00 S-10 with the 2.2L four-cylinder engine. Designed to provide an increase in low- and mid-range torque, these headers feature mandrel-bent, 1-1/2-inch-diameter primaries. and a precision-formed collector. The primaries are sequenced into the collector for better cylinder scavenging and maximum power. The header also comes with a mandrel-bent extension to mate directly to the stock or stock replacement catalytic converter. For more information, contact: PaceSetter Performance Products, (602) 266-1964, www.pacesetterexhaust.com.
| chevrolet S10 Four Cylinder Performance Part royal Purple Synthetic Products
Royal Purple Royal Purple makes synthetic products for every area of your Dime, including engine oils, transmission fluids, gear oil, coolant additives, fuel system cleaner, power steering fluid, grease, and penetrating lubricant. Synthetic fluids provide improved performance through a reduction in power-robbing friction. For more information, contact: Royal Purple, (888) 382-6300, www.royalpurple.com.
| chevrolet S10 Four Cylinder Performance Part true Flow Foam Air Filter
True Flow Foam Air FilterTrue Flow Foam Air Filters combine airflow capability and high-filtration efficiency in a drop-in filter for your Dime. True Flow foam full-depth filters come with a lifetime warranty and are easy to wash and reuse. Follow the simple cleaning instructions included in your filter box at the suggested cleaning intervals and enjoy great filtration and airflow for the life of your vehicle. For more information, contact: True Flow, (866) 999-9098, www.trueflow.com.
| chevrolet S10 Four Cylinder Performance Part nitrous Works Power Wing
NitrousWorks Power Wing The PowerWing nozzle kit from NitrousWorks, a Barry Grant company, delivers instant power to the Chevy S-10. With just a click of a button, 25 to 100 added horsepower is available at wide-open throttle. This nitrous kit is a complete, turn-key "wet system" that includes: a PowerWing nozzle; calibrated jets in increments of 25, 50, 75, and 100 hp; solenoids; stainless-steel line and fitting; filter; hardware; instructions; 14-foot/4AN stainless-steel bottle feed line; and a 10-pound-capacity bottle. For more information, contact: NitrousWorks, (706) 864-8544, www.barrygrant.com.
| chevrolet S10 Four Cylinder Performance Part sts Performance Package Pulley Belt
| chevrolet S10 Four Cylinder Performance Part sts Performance Package Intake
STS Performance Package STS Performance now has Power Packages for '94-'04 2.2L four-cylinder S-series trucks. The packages feature either triple-chrome-plated or powdercoated silver intake, K&N filter, new underdrive crank pulley, underdrive alternator pulley, and serpentine belt by Goodyear. For more information, contact: STS Performance, (562) 531-6328, www. sportruckspecialties.com.
| chevrolet S10 Four Cylinder Performance Part split Fire Spark Plugs
SplitFire Spark PlugsSplitFire offers a comprehensive line of spark plugs for all S-series truck applications. The design allows a larger and quicker flame kernel to develop that is not blocked by ground electrode; this helps improve the combustion of the air/fuel mixture. For more information, contact: SplitFire, (800) 224-7584, www.split fire.com.
| chevrolet S10 Four Cylinder Performance Part nos Power Fogger
NOS PowerFogger Nitrous Oxide Systems announces its new PowerFogger Universal "Wet" Nitrous Systems for four- and six-cylinder engines. This wet system provides 35 to 75 adjustable horsepower using the NOS Soft-Plume fogger nozzle for superior nitrous and fuel distribution. The nozzle plumbs directly into your air intake and comes with a micro-switch that reads wide-open throttle. This system comes complete with a 10-pound blue bottle, brackets, solenoids, Soft Plume fogger nozzle, braided hose, micro-switch, and everything needed for a clean and simple installation. For more information, contact: Nitrous Oxide Systems, (714) 546-0592, www.nosnitrous.com.
| chevrolet S10 Four Cylinder Performance Part performance Distributors Ignition
| chevrolet S10 Four Cylinder Performance Part spark Plug Wires
Performance Distributors' IgnitionThe Performance Distributors' kit consists of two Screamin' Demon Coil Packs and a set of Live Wire spark plug wires. This kit is for all four-cylinder S-series models from '94-'03. The Screamin' Demon Coil Packs allow you to open up your plug gaps to 0.065 inch, burning your fuel more completely. The coils are epoxy-filled, leading to improved heat transfer and vibration resistance. The Live Wire plug wires are approximately 0.50 inch in diameter and can withstand temperatures as high as 1,400 degrees F. Built with a very low resistance, Live Wires deliver every ounce of high-voltage spark that the Screamin' Demon Coils produce and are available in red, blue, black, purple, and yellow. For more information, contact: Performance Distributors, (901) 396-5782, www.performancedistributors.com.
| chevrolet S10 Four Cylinder Performance Part hooker Muffler
Hooker Muffler Hooker Headers announces its all-new line of Tuned Flow Performance Mufflers with straight and slash-cut tips. With the new Hooker Tuned Flow mufflers, sound and flow can be adjusted as much as 40 percent without disassembly. These units are designed to be weld-on or clamp-on at the end of tailpipes or header collectors. A universal U-channel mounting bracket makes for an easy installation on most applications. They come with a 2.5-inch inlet with either a 4-inch-diameter straight or slash-cut, show-quality chrome finish. For more information, contact: Holley, (270) 781-974, www.holley.com.
| chevrolet S10 Four Cylinder Performance Part professional Products Fuel Pump
Professional Products Fuel Pump Get the fuel from the tank to the engine more efficiently with the new PowerFlow Electronic Fuel Pump from Professional Products. The PowerFlow Electronic Fuel Pump is a simple two-wire connection and is equipped with a stamped-steel housing, sturdy mounting tabs, and inlet and outlet fittings suitable for 5/16-inch fuel lines. For more information, contact: Professional Products, (323) 779-2020, www.professional-products.com.
