QuestionI do not really see what is missing...Let me try and restate everything again.... I have a 1996 Chevy Camaro Manual Trans., v-6 3.4L eng. and my problem is when I turn the vent, Air conditioner, or heater on, it only blows on the winshield or floorboard... The driver or passenger gets no air......The air from the a/c is cold, it just doesnt blow like it is suppossed to....Any help, and let me know what additional info I need to provide...Thanks a million
AnswerPLEASE do NOT start a NEW question. Use the FOLLOW UP or ADD ADDITIONAL INFORMATIO to your ORIGINAL question.
What was the LAST repair on the vehicle ?. ANY repair of any nature ?. In most cases problems that arise days, weeks or even months later can usually be traced back to the previous repair.
PLEASE keep your questions on the ALLEXPERTS BOARD because without it, Us volunteers would NOT be needed.
I get 50 to 60 questions daily and can't remember what was originally said in your first question.
OK, You have several possibilities:
1. The small vacuum line that is connected to the engine vacuum source that passes thru the firewall into the passengers side of the vehicle under the dash to the A/C-HEATER PROGRAMMER is either disconnected, Pinched flat or has a break in it.
2. You have a fault within the A/C-HEATER PROGRAMMER.
3. One of the vacuum valves, Most likely the MODE valve is faulty.
4. The vacuum line FROM the A/C-HEATER PROGRAMMER to the MODE VAVE is disconnected, Pinched or has a break in it.
Let me know.
autohelp
