QuestionWould it be possible to swap 1989 Chevy Beretta Doors with a 1992 Chevy Beretta. Also the rocker panels for the 1992 Chevy Berettas do they unbolt completely or just partially I wanna replace them just not sure if it is possible or how extensive it will be.
AnswerHi Cory....I did some checking for you, and found out that the doors between 89 and 92 are indeed interchangeable, as long as the two vehicles have the exact same trim line. The same applies to the rockers, and rocker mouldings. To find this out, you will need to run both vehicle serial numbers through your local GM Dealership.
In regards to the actual rockers, they are welded into place. If you are referring to the rocker moulding, they will be attached with either clips, screws, or tape...or a combination of all three.
Hope this helps you out....Thanks for your question....Dave.
