Auto body repair & detailing: Altima 2000 inerior door panel removal., pep boys, auto parts store

Question
How do I get the r. rear door panel off on my 2000 Altima. A
collision pushed the lower door in so the window does not go
down (nor do the others except the driver's, not sure where the
electrical problem is and I can't get inside the door)). I can't find
screws etc to remove the panel. Are there some clips behind the
panel for which I need a special tool?
Thanks
 fs

Answer
you need a panel remover tool you can pick one up at your local pep boys or auto parts store. around 5-10 dollars.
you shouldhave 1 screw in the pull part of your door where you grab to pull it shut. you also may have one in behind the inside handle. look for a cover same color as your door panel. they are cover plugs.  if your door is hit hard you may have steel beam bend in it. that would be the only way it would hit the wiring. good luck. hope this helps .
o ya once you get the screws all out use the panel tool . put it inbetween the panel and door and pry out on the panel . that should do it .