Auto body repair & detailing: 93 Chrysler bumper removal, chrysler new yorker, napa auto

Question
I have a 93 Chrysler New Yorker Salon.  The front bumper is pushed down about one inch and slightly in on the passenger.  I can see inside the bumper the part that is bent.  This was due to a accident I had about a year ago where contact was only at corner of the bumper on the passanger side.   

Can I find some where on the internet a digram showing the proper way to remove and install the front bumper.  I want to try and remove the bumper and straighten the bent steel plate and reinstall the bumper. I apperciate any help thank you.  

Answer
Alvin,
 We are not sure about anything on the internet, but you can get a Procedure Manual  for your specific vehicle from an auto parts store, like  NAPA, Auto Zone, or Advanced Auto.  This will give you that information and more, in case you need to do any other work on your car.
Thank you,
Mike and Lisa