Auto Parts: Auto electrical, negative terminal, wiper switch

Question
I have to hook up a temporary wiper switch. I have a Pollack(www.pollakaftermarket.com) HD 3-pos 12V switch, pictured on their website, only mine has the fuse lengthwise on the belly of swch and the center post is hanging out the back. I'm running only HI-LO. There are 2 posts on each side of the switch. How do I connect power and ground to this? Thanks

Answer
Hi John,

It didn't come with wire instructions?

Typically, if you have a three position switch, 6-terminals, the center two terminals would be the power-connection and to one end would be the feed wires to power that device and on the other end of the switch you'd connect the wires going to THAT device. So Power and ground have their own terminals in the center and each side has a positive as well as a negative terminal that corresponds with it's location on the switch.

Thanks for the question, I hope this information was helpful to you.
Fred
www.knucklebusters.us
570-453-0910
"Re-use is the best form of recycling" Help us recycle by purchasing used parts from us!
Looking for an ASE Certified shop near you? ASE Certified Technicians are the BEST of the BEST!
Click here: http://www.ase.com/bluesealsearch/locator.php