QuestionNeed to take out the Car Alarm Python System 60 Steal Stopper, Door Lock, Interface hook up, truck circuit, Starter kill and impact sensor that I had installed December 1993 on my 1987 Acura Legend. It will not let me start my car. My car will start then when I stop the car it will not start again. The mechanic I waS GOING TO has replaced the ignition, starter and alternator, also recently relay. I have spend a bundle of money trying to get the problem solved the last two years so can really use your help in taking this system out of my car.
Answer
repair starter wire
Ok, do the following:
Locate the BLACK/WHITE wire in the
ignition switch harness. On this wire
was installed a relay. You need to cut it
out, and butt connect the 2 free ends of
the starter wire back together.
see file attached.
Done.
Have a good weekend.
(If this helped and you acheive
your goal, don't forget I love beer! ;>)
TIPTHEHELP.com )
ALARMTEK
