Car Alarms: 2000 Toyota Corolla, toyota alarm, toyota corolla

Question
I havent had the keyless remote to the car in years. I am currently trying to sell it but the alarm will not let me start it up. This is a toyota alarm connected to the horn and lights will not even try to crank. I know about the little button to reset the alarm but as the car is so old the pieces have started falling apart. I dont know what to do to get it to reset so I can get it started and sold! Please help!!!

Answer
It's an after market system
from your description.
(valet switches do not exsist in
factory alarms/keyless entry.

Ok then, get over to the local car alarm shop,
or Best Buys will have a valet switch that
will fit for your
alarm.

In the mean time, cut off the switch part,
leaving the 2 wires that were connected, free.

Then twist together, turn on the ignition,
hold both wires to ground until the siren chirps.

That should reset and place the alarm into
over ride for now. Nothing accept the keyless entry
if installed will operate until you repeat the
same steps.

Then get a new switch and you're all set.

Have a good day.
Let me know if you were
successful.

ALARMTEK
CARALARMZ.COM