Car Alarms: 91 Infiniti Q45, valet mode, infiniti q45


Question
My car refuses to turn over. I've changed the starter twice, when that was the problem, but now I hear a click from the fuses next to the pedals whenever I try to turn the car on.
The previous owner 'disabled' the alarm system by cutting a few wires, but it has gone off and stopped me from starting the car in the past, so I feel like that might be an issue. I'm no a car person, but from what I've found by digging through forums and similar sites I think the theft prevention system might be triggered.
I appreciate your time,
Elec

Answer
Ok, an installer would place the velet switch in a semi
hidden area. I'd look under the dash area
for a button or, a toggle switch. When you locate it,
turn on the ignition key, press and hold in the
button (little spring loaded micro button, red or
black possibly), until the alarm chirps 1 time.
This should over ride the system, and only the
keyless entry part, if installed, would still be
operating.

The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you.

That should solve the troubles.

ALARMTEK
CARALARMMAN.COM