Car Alarms: 2002 Dodge Durango R/T, dodge durango, sensitivity levels

Question
QUESTION: Is there a way to turn up the sensitivity on my dodge durango R/T car alarm??

ANSWER: No. Factory alarms do not have setting "wheels" or
anything else like it to change the sensitivity levels.

Sorry. you'd need an after market alarm to be able
to control that.

ALARMTEK
CARALARMMAN.COM

---------- FOLLOW-UP ----------

QUESTION: We do have a aftermarket alarm on the vehicle. We juat have no idea what kind of alarm it is & when we purchased the vehicle it had no manuel with the system. Where would I be able to turn up the sensitivity on the after market alarm?

Answer
Not certain of the system, but MOST knock/impact
sensors have a wheel inset into it to turn up or down
(counter clockwise is down).

Locate the sensor under the dash and turn down or
simply unplug it. Should be a little oblong box
wire tied up high under the dash, and would
blink when it detects vibration.

Then turn down, check, turn down, check
to see if the level suits your needs,
and you'll be all set.

Good luck.

ALARMTE