Car Alarms: Alarm toooo sensitive, inset, vibration

Question
pursuit series pro 9232a Alarm currently goes off at the slightest noise or vibration. Can I desensitize it so that an outside door slamming won't set it off? And how do I do it?

Answer
Not certain of the system, but MOST knock/impact
sensors have a wheel inset into it to turn up or down
(counter clockwise is down).

Locate the sensor under the dash and turn down or
simply unplug it. Should be a little oblong box
wire tied up high under the dash, and would
blink when it detects vibration.

Good luck.

ALARMTEK