Car Alarms: Valet Mode Alarm, subaru legacy outback, valet mode

Question
I have a 1999 subaru legacy outback wagon.  I just recently had my alernator replaced and my alarm appears to be stuck in valet mode.  How do I take the alarm out of valet mode?

Thanks - Sal

Answer
Ok, try this.
Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, found under the dash area, usually to the
left of the leg drilled into a hidden away spot,
until the installed LED (the blinking light)
in your dash area goes off, and the siren chirps twice.
(Your valet switch might be the toggle (on/off) type.
in this case, key on, flip switch in oposite direction,
key off.)

This should reset the alarm.

Just Repeat these steps to place it
back to valet mode.

That should do it.
Let me know what happens.

ALARMTEK
INSTALLSUPPORT.COM