Car Alarms: Izuzu rodeo car alarm, valet mode, dash area

Question
My IZUZU Rodeo security system doesn't let me start the car, this started after I had a remote starter installed, the car it has plenty of battery power since my lights are bright and the horn works; but right now  I am stucked at the mall..how can I overide the system so that I can start my suv?

Answer
Ok, an installer would place the velet switch in a semi
hidden area. I'd look under the dash area
for a button or, a toggle switch. When you locate it,
turn on the ignition key, press and hold in the
button (little spring loaded micro button, red or
black possibly)(could also be embeded in the
antenna on the window glass),
until the alarm chirps 1 time.

This should over ride the system, and only the
keyless entry part, if installed, would still be
operating.

The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you.

That should solve the troubles.

Let me know what you discover.

ALARMTEK
CARALARMMAN.COM