Car Alarms: Autopage RS 1000 into 1992 Ford Explorer, amp fuses, pink wire

Question
Ok I have a couple questions ; first can I hook up remote lock, unlock without
using a relay? If so how? Autopage RS1000 alarm comes with a green wire
with (-)lock (+)unlock , then another wire blue (-)unlock (+)lock then a
seperate pink wire for 2 stage unlock. Then there are 2 power wires for
remote start. Both 20amp fused then another constant power for alarm. They
have 15amp and 3 amp fuses. Is it ok to hook all together and tape the
yellow high current constant? Or should I seperate the alarm power from the
remote start power. Taping RS to the yellow and tap into stereo for alarm
power? Last one is can I hook up dome light control and doortrigger input
together at the common door trigger wire? Or do I need a relay for domelight
control?

Answer
You need more assistance here then I offer for free sir,
but I do have a free forum you can go to for assistance at www.INSTALLSUPPORT.com and you can get the proper wiring chart and diagrams for this project at www.WIRINGCHARTS.com so you
can do this right.

Good luck.

ALARMTEK