Car Alarms: Excalibur Car Alarm, excalibur car, valet mode

Question
I have a 1994 Dodge Caravan and had the dealer install a Excalibur Car Alarm.  The remote will not get the red blinking light to stop and is keeping me from starting the van.  I installed a new battery in the remote.  The van has been sitting for 4 months.  Please advise what else I should do.  Thank you

Answer
To try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you.

That should solve the troubles.

Let me know what you discover.

ALARMTEK
CARALARMMAN.COM