Car Alarms: that dam transponder key on my 2004 jeep weangler, jeep wrangler, transponder immobilizer

Question
is there a way to deactivate the transponder system thats on my 2004 jeep wrangler ?

Answer
As long as you have a working system now,
the bypass required is the IB-UCH2GX - Chrysler Sentry Key Transponder RF Bypass -All Years.
Override all generations of Chrysler Sentry key transponder immobilizer systems. This bypasskit is compatible with both 1st and 2nd generation Chrysler, Dodge & Jeep Sentry Key transponder immobilizer systems. This transponder bypass includes a MUX activation output which initiates the 2nd Starter & 2nd accessory wire during start up.

You will need the 2 keys provided with the vehicle to program
the bypass kit, or it's no go.

I suspect from the subject presented,
yours is either in tamper mode now, or is intermittent.
Either way is tough to work with, but the truck MUST be
able to start and round, or again, no go on programming
or bypassing using the module.

If this is your trouble, Jeep will need to reset the system
so you can then bypass it. No other way round that one.

Hard one to do under certain circumstances.

ALARMTEK