Car Alarms: resetting keyless start, valet mode, keyless start

Question
I had a remote keyless start installed on my 99  plymouth graand voyager. I had to reset it a couple of years age because on of the kids played with it I took it back to the pace and yhey showed me by holding a button down and the part that is installed on the widshield but I forgot the steps and one of my kids has messed with it again and I need to reset please help

Answer
Ok, should be fairly easy. To try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

That should solve the troubles for now.
Repeat the steps to toggle back to valet when needed.

Let me know what you discover.

ALARMTEK
WWW.CARALARMMAN.COM