Car Alarms: valet mode button 99 durango, alarm security system, car alarm system

Question
QUESTION: I have looked under the dash and I cant find the valet mode button for my 99 durango. do you know where it is located under the dash?

ANSWER: If after market, the
valet/overide button, should be found under the
dash area, probably to the left of the leg area.

If this is the OEM/Factory alarm, there is no
valet override switch or button.

ALARMTEK

---------- FOLLOW-UP ----------

QUESTION: Its stock, I thought so do you know how (if) to reset a stock durango alarm?

Answer
There is a fix, but that's a bit of a problem here.
Because yours is a "FACTORY" or, OEM
(original Equipment Manufacturer) "alarm/security" system,
then the disabling procedure info for any given
specific vehicle is now deamed to be too sensitive to
publish here (as suggested by ALLEXPERTS administration.!).

So, to comply, as of March,22 08, this service is no longer
part of the volunteer information I can offer for free here at
ALLEXPERTS.com . Specific OEM/FACTORY alarm disarm/disabling
info is now available ONLY at the WIREWERX.

My installation wiring charts provide the proper wire colors,
polarities, and locations to install a keyless entry,
remote start or, car alarm system into any given vehicle,
or if just trying to disarm/disable your factory/OEM system,
there is a link there to get a tutourial on how to do it yourself
for only $2.99.

I hope you can appreciate the legal reasons behind not
providing this info any longer to just anyone who asks
for general consumption. By doing it this way, I'll
get a record of payment and a name/email address as
a stop gap to help prevent any unauthorized disabling of
your system or anyone elses, by a would be car thief!

Please go to the WIREWERX so I can get you the
info you require to fix your situation.

Good luck with this issue.

Robert Martin-ALARMTEK AUTO ALARM
The WIREWERX= www.WIRINGCHARTS.com