Car Alarms: 1995 mitsubishi 3000gt, mitsubishi 3000gt, valet mode

Question
my car w0nt start, the battery is fine but when i start it, it is just blank, i think it had something to do with the sensors, it happened to me a week ago & while playing with the prestige keyless remote, it started but now it doesnt, any ideas?

Answer
Ok, to try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you.

That should solve the troubles.

Let me know what you discover.

ALARMTEK
CARALARMMAN.COM