Car Alarms: Adiovox Pusuit Remote start does everything but start, resident technicians, toggle switch

Question
I have an audiovox pursuit series model pro-9275T that was installed in my 2004 Ford Explorer when i bought it. Recently the car stopped starting. When i depress the button 2X, the lights flash, and the interior lights and radio come on, but the remote start seems to make no attempt to turn the car over. The LED on the dash blink 2X when the remote is depressed, and then starts a constant flashing when the car should be "turning over" .  This happened one time before, and i just turned off the alarm using the red toggle switch and left it off a few days and the alarm was back to normal when i turned it back on. That didn't work this time, and I don't really know what else to do :(     the doors will lock and unlock, and like i said when I depress the start button 2x, all the electronics on the inside of the car turn on, but she doesn't even try to crank. (the car starts fine with the key)

Answer
On this one, the best thing here is
to go to my installers forum at
www.installsupport.com and see if
my resident technicians there can assist
with this project.

I unfortunately don't know the
system you are working with to advise
you properly on it's functions,
features or trouble shooting
information. Better to check with a tech
that might.

Good luck there.

ALARMTEK
CARALARMMAN.COM