Car Alarms: Ungo Security, valet service, dash area

Question
I have an ungo security alarm installed in my ferrari but the other day i took out of the glove box, an ungo keyfob with 2 buttons on it, i pressed one of the buttons accidentally! Now when i open my car the indicators flash for about 25secs with no way of stoppping them, any idea of how to reset it or anybody know of a dealer in northern ireland that i could contact? thanx for your help, much aprreciated!

Answer
Gotcha, let's put it into valet/service mode,
and try to reset the alarm to default mode.

Look under the dash area for a button or, a toggle
switch. When you locate it, turn on the ignition
key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.

At this point. the alarm would have reset.
If this had a starter kill relay installed,
it would now be opened, and the engine would
turn over when tried.

You would repeat these steps to go back to
user mode to see if this was corrected,
or simply take it to a tech for removal.

Let me know how it goes.

ALARMTEK
INSTALLSUPPORT.COM