Car Alarms: ALARM, camaro v6, valet mode

Question
I have 98 camaro v6, every time I lock the car with the keyless remote, after 5 secs  the car starts beeping and I have to press the lock button on the remote again to stop the beeping. It does this every time I lock the car.

Answer
It's likely to be an after market system.

To try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is to go to a local technician to
identify it, and affect neccesary service for you.

Repeat steps to put into user mode.

That should solve the troubles.

Let me know how it goes.

ALARMTEK
CARALARMMAN.COM