Car Alarms: 1996 nissan quest, valet mode, nissan quest

Question
i have a 99 nissan quest mini van. the alarm system seems to be a problem in my vehicle. it was installed after the car was purchased. im just curious on how i can remove it completely. the car will not start right now because the alarm system is acting up. can you give me dirrections on how to remove it?
thanks for you time,
Shane Nakamura
camarillo, Ca

Answer
To start, look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. The next step is to
either remove the alarm or, try to identify,
and get new remotes for it. To get the notes
for removing it, go to www.wirewerx.com .

But once in Valet mode, it will allow the car
to start and operate like there was no alarm at all.

Let me know how it goes.

ALARMTEK
CARALARMMAN.COM