Car Alarms: Prostart CT-5000 solid LED, valet mode, dash area

Question
Hi,
I have a prostart CT-5000 installed in my 93 Civic It worked fine armed and doors locked. When I disconnected the battery the LED went solid and the remote just stopped working any thoughts? any help would be great thanks

Jay

Answer
Should be no problem really.
It appears from your expaination, that the
Prostart is in service mode.

Ok, try this.
Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, found under the dash area, usually to the
left of the leg drilled into a hidden away spot,
until the installed LED (the blinking light)
in your dash area goes off, and the siren chirps twice.
(Your valet switch might be the toggle (on/off) type.
in this case, key on, flip switch in oposite direction,
key off.)

This should reset the system.

Just Repeat these steps to place it
back to valet mode.

That should do it.
Let me know what happens.

ALARMTEK
INSTALLSUPPORT.COM