Car Alarms: blackwidow car alarm, honda crv, fcc id

Question
my wife's 97 Honda crv has a blackwidow keyless entry/alarm we/ on the back FCC id# OARTXAM2000. The red led is flashing and will not turn off, the keyless entry does not work, we have changed the battery in the unit. we have also located and tried to reset the system but have had no luck. maybe I have the wrong reset instructions. I used the info from a reply of yours on "how to disconnect". Thanks the breaker is driving us crazy. Peter

Answer
You'll need to set off the alarm for a few seconds.
Then, look under the dash area for a button or, a toggle
switch. When you locate it, turn on the ignition
key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.

At this point. the alarm would have reset.
If this had a starter kill relay installed,
it would now be opened, and the engine would
turn over when tried.

You would repeat these steps to go back to
user mode to see if this was corrected.

But if it does work, I'd keep it this way, and
replace the alarm asap with one you know and
understand how it operates for the best overall
experience.

Let me know if it works for yours.

ALARMTEK
INSTALLSUPPORT.COM