Car Alarms: 98 Civic Keyless, remote transmitters, fcc id

Question
I recently bought my 98 Civic. It have factory radio and power locks. There was no remote for it from old owner, so i bought one on ebay. During the programing mode power doors are OPENING and it doesn't mater if I press lock or unlock button on the remote. When i program it only panic button is working for me. I already tried to use radio from my friends Civic but nothing is changing, also different remotes doing the same thing. I assume that problem is somewhere in harness of my car. Can you tell me where should I look to fix this problem. Thank you.

FCC ID: A269ZUA102 - RADIO
FCC ID: A269ZUA101 - REMOTE 1
FCC ID: A269ZUA106 - REMOTE 2


Answer
THIS IS AN AUTOMATED RESPONSE TO
YOUR QUESTION ABOUT "REMOTE PROGRAMMING".

As Homer Simpson Is Fond Of Saying: DOH!

If you did not notice, there is a note on
the site you just submitted this question from
that says I do not provide transmitter programming
information here. That's still true.
I don't.

Too many variables for me to get into
with all of that, so I opt to leave it
up to others in this field to fill that
particular demand/need.

But never fear! As I said,
there are those that do this
service online.

Try a site like www.keylessride.com.
www.keynfob.com , or www.remotes4you.com
as providing replacement remote transmitters
and programming them, is what they specialize in.

Sorry about that.
Good luck with it.

R. Martin/ALARMTEK
CARPROTECTOR.com