Car Alarms: Chrysler Voyager, valet mode, chrysler voyager


Question
QUESTION: The battery went flat and when I recharged it, and reconnected it to the car, the alarm continually sounds. How do I get it reset and back to normal?

ANSWER: Please tell me what you are experiencing.

I need to determine whether it's a factory alarm
issue or, if it's an aftermarket system you are
dealing with.

Is it: Headlights flashing, car horn honking
and a worded SECURITY" light in the dash flashing?
(doubtfull since none of the notes show this
car as having a factory alarm system)
Or,
is it: flashing parking lights,
an LED in the dash area, and a siren
going off?

Let me know more on this to better
advise you on a course of action
to take, to help you to fix this
situation you're in quickly.

Best Regards,

Robert Martin
CEO/ALARMTEK
CARALARMMAN.com

---------- FOLLOW-UP ----------

QUESTION: I am experiencing flashing parking lights,
an LED in the dash area, and a siren
going off. However the car will start so obviously there is no engine disabling mechanism. Cheers Des


Answer
It's an after market system from your description.
Probably dealership installed when
it was purchased originaly.

To start, look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed.

But once in Valet mode, it will allow the car
to start and operate like there was no alarm at all.

Let me know how it goes.

ALARMTEK
CARALARMMAN.COM