Car Alarms: 1992 Jeep Cherokee alarm, jeep cherokee limited, jeep cherokee

Question
Hi
I have a 19992 Jeep Cherokee limited that likes to lock me in or out. I have read that you can ground out these systems by taping into a wire in the drivers kick panel.
I would like to know what wire and what harness it is in as there are two harnesses?
Also when grounding it out do I need to split the wire in two or just strip some sheathing off of the wire to tie in.

Thanks for any help
as its driving me nuts
Jeremy


Answer
Ok,
the FACTORY ALARM DISARM WIRE IS
green/orange  |- negative polarity|
located in the driver's kick panel wire
pack coming out of the door.

Locate & put it to
a solid chassis ground. This terminates
the OEM alarm functions entirely.

Thant should do it.

ALARMTEK
CARALARMSTORE.com