Car Alarms: please help me, valet mode, jeep cherokee

Question
i have a 89 jeep cherokee it has the factory alarm on it i believe it has armed it self somehow  the fuel pump is workin but i have no fire i have changed all the relays a new distributor new coil new ignition module is there any way i can bypass it to see if that is the problem if u could please help me i would greatly appreciate it

Answer
It's an after market system from your description
and my notes do not show any factory system.
Probably dealership installed when
it was purchased originaly.

To start, look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. The next step is to
either remove the alarm or, try to identify,
and get new remotes for it.

But once in Valet mode, it will allow the car
to start and operate like there was no
alarm at all.

Let me know how it goes.

ALARMTEK
CARALARMMAN.COM