Car Alarms: 91 Maxima Security light flashing and cranks but No Start, silver dots, security light

Question
I have a 91 maxima that stalled while it was idling and it would not restart. The security light is flashing on the dash, but can that cause the car to not start? It cranks fine, but it wont fire. I read an earlier answer that said to open the door with the key to reset it but that didnt work. I also read  about the "theft warning" box under the dash which I found, but I didnt want to start hacking wires if thats not the cause. Ideas?

Answer
Well yes, you would insert the key in
the drivers door, turn left, then right
to disarm and reset it. If no joy there,
try this way...

The FACTORY ALARM DISARM WIRE IS
lt.green/black with silver dots |-| located
at the anti-theft module to left of
steering column. It actually says
"Theft Warning on module".

Once Located, splice into this wire with
a simular guage wire, and put it to
a solid chassis ground. This terminates
the alarm functions entirely.

That ought to do it for ya.

Have a good day.

ALARMTEK
CARALARMSTORE.com