Car Alarms: 1991 Crhrysler Lebaron GTC, engine stalls, green orange

Question
We parked the car out back over winter and low and behold the battery died (surprise). Now we have changed the battery but the security feature that came with the car (Chrysler part), keeps the light flashing and the engine stalls after 3 seconds. How do we turn off the alarm we did this twice but can not do it again ( I have no idea how we did it in the first place). We tried locking and unlocking the driver door and it did not seem to do anything the lights keep flashing and the engine stalls.

Answer
Ok, time to get rid of the factory
alarm system now.

Normally, you would insert the key in
the drivers door, turn left, then right
to disarm and reset it. If yours is malfunctioning,
you can disable it for good by doing the following:

The FACTORY ALARM DISARM WIRE IS
lt. green/orange |-| in the drivers door harness.

Once Located, splice into this wire with
a simular guage wire, and put it to
a solid chassis ground. This terminates
the alarm functions entirely.

However, at this point, this car would be exceedingly
easy to steel, so I suggest you get an aftermarket
alarm system to protect it from here on in.

Have a good day.

ALARMTEK
CARALARMSTORE.com